RANDALL AMPLIFIERS
"Hearing is Believing"
RETURN TO AMPS
RX SERIES

RX15R
Features
Pic Coming Soon
RX20R
Features
20 watts
10" Celestion speaker
2 Channels
Clean with level
Overdrive with boost mode
3-band EQ
Master Volume control
Spring Reverb
Headphone out
CD/Tape Input

RX20D
Features
20 watts
10" Celestion speaker
2 Channels
Clean with level
Overdrive with boost mode
3-band EQ
Master Volume control
16 digital effects
Headphone out
CD/Tape Input

RX30D
Features
30 watts
12" Celestion speaker
2 Channels
Clean with level
Overdrive with boost mode
3-band EQ
Master Volume control
16 digital effects with level
Effects loop
Headphone out
CD/Tape Input
2-button footswitch included
G2 SERIES
G2 Series Amplifiers all come with the foot controller
in one complete package


RG75DG2
Features

RG75G2
Features

RG100SCG2
Features

RG200G2
Features
HEADS &CABS

RH200G2
FEATURES:
This 200W hi-gain head has a full array of gigging necessities. 2 footswitchable channels: a clean channel with boost option, and an overdrive channel with 2 gain stages. Connections include speaker outs for 4 and 8 ohms, line out, and a series effects loop with level controls. Sound controls include master volume, contour, and voicing option. Comes with 4-button footswitch.

R412CX 4x12
FEATURES:
Includes the RH200G2 head and the R412CX 4x12" speaker cab.The 200W hi-gain head has a full array of gig-amp necessities. 2 footswitchable channels: a clean channel with boost option, and an overdrive channel with 2 gain stages. Connections include speaker outs for 4 and 8 ohms, line out, and a series effects loop with level controls. Sound controls include master volume, contour, and voicing option. Comes with 4-button footswitch.The 200W 3/4" birch-ply cab has a straight front, an angled baffle, and is loaded with 4 Celestion Rocket 50s. Equipped with a dual I/O jack and casters. 29-1/2"W x 29-1/2"H x 14"D. 85 lbs.

R125CX
FEATURES:
Includes the RH200G2 head and the R125CX speaker cab.The hi-gain head is loaded with 200W. It also has a full array of gig-amp necessities. 2 footswitchable channels: a clean channel with boost option, and an overdrive channel with 2 gain stages. Connections include speaker outs for 4 and 8 ohms, line out, and a series effects loop with level controls. Sound controls include master volume, contour, and voicing option. Comes with 4-button footswitch.The R125CX is the perfect box for RH200G2 to push. Loaded with 2x12" Celestion Seventy 80's on top and a 15" Eminence Legend on the bottom. Deep front ports provide extended yet tight low end-bass response. 29-1/2"W x 34"H x 14"D. 85 lbs.
TUBES AMPLIFIERS

RG50TC
FEATURES:
50W of power from 2 EL34EH tubes drive a 12" Celestion. 2-channels with 4 modes: overdrive channel with 2 gain stages, vintage and modern hi-gain stages for the overdrive channel; footswitchable boost mode on the clean channel. External speaker outs and effects loop. Includes 4-button footswitch.

RM50
FEATURES:
The RM50 accommodates any combination of classic or modern amps, simply by plugging in your choice of tube preamp modules. Designed for the club professional who is looking for an all-tube amp with multiple tones. The RM50 gives you 50W of power using Ruby 6L6 tubes, a 12" Celestion G12 Century speaker, and 2 modular channels for plugging in Randall preamps. Controls include master volume, master density and presence controls, and front panel mix control. Connections include a tube-buffered parallel effects loop, series effects loop, slave out, rear master input , and rear bias test points.

MTS MODULE
F
eatures:Modules:
Fender® is a registered trademark of Fender Musical Instruments Corp.
Marshall® and Vox® are registered trademarks of Korg USA Inc.
Mesa/Boogie® is a registered trademark of Mesa Engineering.
Randall Amplifiers is in no way affiliated with Mesa/Boogie®, Marshall®, Vox® or
Fender®.

RM4
Features:
Fe
atures:Four independent channels (with your choice of vintage to modern voiced preamps)
Parallel effects loops with front panel mix control
Series effects loop
MIDI in / thru
Pre and post loop outputs
Two 12AX7's buffer the effects loop
Eleven 12AX7 tubes (when used with 4 modules)
Four button MIDI selectable footswitch
Front & rear panel inputs
For more info please check www.randallamplifiers.com
RETURN TO AMPS